 Air
Filter Regulator
Each Pneumatic operated equipment or instrument
operates efficiently at a particular pressure
and on clean and dry air. As the line pressure
varies and is contaminated with dirt moisture
and oil, use of air filter regulator facilitates
operation in most economical way.
SALIENT FEATURES
Extruded Aluminum Alloy body.
Balance valve disc and nylon
reinforced diaphragm give quick response.
(High capacity series only)
Big orifice provides minimum
pressure droop for high flow capacities.
(High capacity series only).
Large diaphragm area enables
effective pressure control.
Double action filtration
by cyclone separation and residual separation
produces "clean air" for all practical
purpose.
SIZES AVAILABLE
1/4", 3/8", 1/2", 3/4",
1", 11/2" and 2" BSP (F)
SPECIFICATIONS
| Model |
Size BSP (F) |
Dimensions (mm) |
Weight ( Kg.) |
| MNFR-S |
1/8”, 1/4” |
45 dia X 180 height |
0.290 |
| HCFR-S |
1/4”, 3/8”, 1/2” |
80 dia. X 305 height |
1.5 |
| HCFR-S |
3/4” (S) |
80 dia X 311 height |
1.6 |
| HCFR-S |
3/4” (B) |
110 dia X 406 height |
2.1 |
| HCFR-S |
1 1/4”, 1 1/2” |
125 dia X 430 height |
3.6 |
| HCFR-S |
1 3/4”, 2” |
125 dia X 450 height |
4.0
|
MAXIMUM
TEMPERATURE
49 °C
MAXIMUM
PRESSURE
10 Kg/cm2
MATERIAL
OF CONSTRUCTION
Body: Extruded
Aluminum.
Bowl: Shatter proof
Polycarbonate.
Seals: Nitrile
Trims: S.S. and
Brass.
Filter Element:
Sintered Plastic Alloy (25 Micron filter element
standard)
OPTIONAL
a) Metal bowl, for higher working pressure
(18 Kg/cm2) & temperature (up to
250 °C)
b) Metal guard available for polycarbonate
bowls.
c) Different materials of construction like
S.S. 304/ S.S. 316 with seals of Nitrlie or
Viton.
d) 1,5 & 50 micron filter element in sintered
plastic or sintered bronze.
e) Non-Relieving type Filter-Regulator available.
ACCESSORIES
a) Pressure gauge.
b) Mounting bracket.
c) Panel mounting ring (up to size 3/4"(S).
 High
Pressure Air Filter Regulator
High Pressure Filter-Regulator combination
unit is ideally suited for installations having
high incoming pressure. The Filter removes
moisture, oil and dirt from the compressed
air, while Regulator regulates high incoming
pressure and provides a stable output pressure.
This unit is light and compact and ideal for
installations where maximum incoming pressure
does not exceed 40 Kg/cm2 .
Salient Features
Extruded Aluminum body
and bowl.
Double action filtration by cyclone separation
and residual separation produces "clean
air" all practical purposes with minimum
pressure drop.
S.S. Valve pin and nylon reinforced diaphragm
give quick response.
Large diaphragm area enables effective pres-
sure control.
SIZES AVAILABLE
1/4", 3/8", 1/2" & 3/4"
BSP (F)
SPECIFICATIONS
Maximum Temperature:
80 °C
Maximum inlet Pressure:
40 Kg/cm2
Outlet Pressure Range:
0-15 Kg/cm2
Filter Element:
25 Micron filter element standard
MATERIAL
OF CONSTRUCTION
Body: Extruded
Aluminum.
Bowl: Extruded
Aluminum
Seals: Nitrile
Trims: S.S. and
Brass.
OPTIONAL
a) Different material of construction like
S.S. 304/ S.S. 316 with seals of Nitrile or Viton.
b) 1, 5 & 50-micron filter element available.
ACCESSORIES
a) Pressure gauge.
b) Mounting bracket.
|
